Bleeding the fuel lines
| Bleeding the fuel lines |
Use the method described below to speed up bleeding the fuel system if air has entered the system, such as after changing the filter or when a fuel delivery line has been disconnected.
| 1. |
Remove the protective cap and connect
88 19 096 Bleeding equipment
and
30 31 069 Nipple, bleeding equipment
to the service outlet on the delivery line to the fuel pump.
|
|
| 2. |
Draw up fuel until a constant flow of fuel can be seen in the suction line.
|
|
| 3. |
Remove the bleeder nipple from the service outlet while the equipment is running (this avoids fuel spills and air from entering the system).
|
|
| 4. |
Put the protective cap onto the service outlet.
|
|
| 5. |
Start the engine and check the system for leaks and suchlike.
|
|
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
