Balancer shaft transmission
| Balancer shaft transmission |
Balancer shaft chain traction
| 1. |
Chain link, chrome coloured
|
|
| 2. |
Chain link, copper coloured
|
|
| 3. |
Chain link, chrome coloured
|
|
When setting the balancer shaft chain loop, the marks on the cogs must be aligned with the marks on the block. The chain is adjusted as shown in the diagram and when the pulley is zeroed with cylinder 1 in the top dead centre.
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
