Drive belt, auxiliary equipment (multigroove)

/ 9-3 (9440) / 2003 / 2. Engine / 4-cylinder petrol / Basic engine / Adjustment/replacement / Drive belt, auxiliary equipment (multigroove)

To remove

1.	Raise the car and undo the front part of the right wing liner.

2.	Relieve the belt tensioner using 83 96 095 Belt circuit relieving tool B207 and remove the belt.

To fit

1.	Relieve the belt tensioner with 83 96 095 Belt circuit relieving tool B207 and fit the drive belt.

2.	Check the position of the belt on all the pulleys.

3.	Fit the screws and nut for the right wing liner.

4.	Lower the car, start the engine and check the function of the belt.

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.