Measurement unit, combustion (740)

/ 9-3 (9440) / 2003 / 2. Engine / 4-cylinder petrol / Engine management system Trionic T8 / Adjustment/replacement / Measurement unit, combustion (740)

To remove

1.	Unplug the connector to CDM.

2.	Unplug the connector to the catalytic converter temperature sensor.

3.	Remove CDM.

To fit

1.

Fit CDM.

2.	Plug in the connector to the catalytic converter temperature sensor.

3.	Plug in the connector to CDM.

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.