Power steering fluid pressure sensor (739)
| Power steering fluid pressure sensor (739) |
| To remove |
| 1. |
Cut off the cable tie securing the sensor connector.
|
|
| 2. |
Unplug the sensor connector.
|
|
| 3. |
Carefully remove the pressure sensor as it contains loose parts.
|
|
| To fit |
| 1. |
Fit the sensor.
|
|
| 2. |
Plug in the sensor connector.
|
|
| 3. |
Secure the connector with cable ties.
|
|
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
