Idling speed ignition timing
Idling speed ignition timing |
Together with engine air mass control, idling speed ignition timing makes sure the engine develops the correct idling speed/torque to drive e.g. the generator, power steering pump and A/C compressor.
Idling speed |
The normal idle speed is shown in the table below but if necessary can be increased to 950 rpm. This can be done e.g. at high alternator load or high power steering assistance required. Immediately after starting, the idle speed is always increased and falls after a while to the normal idle speed.
This is done by regulating the ignition timing and air mass control.
Engine variant | Idle speed rpm |
B207E/L M-03 | 720 |
B207E/L M03½ - | 720 |
B207R M03½ - auto neutral position | 850 |
B207R M03½ - auto drive position | 720 |
B207R M03½ - Man: | 850 |
Engine torque requirement |
The control module calculates the necessary engine torque in order to drive the engine and other loads such as the A/C compressor and the generator.
This calculation is the basis for the idling speed ignition timing so that the correct torque is obtained.