Oil return pipe, turbocharger
Oil return pipe, turbocharger |
To remove |
1. |
Raise the car.
|
2. |
Remove the turbocharger delivery pipe.
|
4. |
Remove pipe and its O-ring from the connection hole in the engine block.
|
To fit |
Important | ||
To reduce the risk of hoses mounted on the delivery side of the turbocharger coming loose due to low friction at high air pressure, the hoses and connecting pieces must be cleaned thoroughly before fitting. Use a rag dampened with 93 160 907 Motip Dupli cleaning agent to wipe clean inside the ends of the hoses. Clean the connecting pieces as well. If hose clips are rusty or damaged, they must be replaced so the correct clamping force is maintained. |
||
1. |
Fit the turbocharger oil return pipe to the turbocharger using a new gasket, and connect the pipe with a new O-ring, lightly greased with 30 06 665 Vaseline, to the connecting hole in the engine block.
Tightening torque, oil return pipe to turbo 15 Nm (11 lbf ft) |
2. |
Fit the turbocharger delivery pipe.
|
3. |
Lower the car.
|