(TA365-0508) SCL can not be added after replacement
| TECHNICAL ADVICE - Quick information for your help | |
| Bulletin Nbr: | TA365-0508 |
| Date: ........... | October 2005 |
| Market: | All |
| SCL can not be added after replacement |
| VEHICLES CONCERNED |
Saab 9-3 03-.
| BACKGROUND |
We have seen a increased number of faulty replaced CIM:s, where the root cause was the SCL, but the new SCL could not be added to the vehicle.
| SYMPTOM DESCRIPTION |
SCL Add failed, due to DTC B3948:00 set in CIM.
B3948:00 is a general code for steering lock and will be set together with a DTC that show what component/system failed.
Add is not possible as long as the DTC are stored in CIM.
| ACTION |
Replace the faulty SCL and connect it.
Erase DTC B3948:00 in CIM (without turning ignition from lock) (Tech2 Diagnose / MY / Saab 9-3 Sport (9440 ) / All /Diagnostic trouble codes (DTC)/Clear vehicles DTC:s/Exit/OK).
Do an Add of SCL
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
