Solar sensor

/ 9-3 (9440) / 2003 / 3. Electrical System / Driver information, main instrument unit and SID / Adjustment/replacement / Solar sensor

To remove

1.	Remove the speaker grille.

2.	Remove the screws.

3.	Lift out the SID unit and unplug the connector.

4.	Remove the solar sensor from the cover.

To fit

1.	Fit the solar sensor to the cover.

2.	Plug in the connector.

3.	Fit the SID unit.

4.	Fit the speaker grille.

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.