SAAB WIS ONLINE

Infotainment control panel, ICM (736)

Infotainment control panel, ICM (736)

Location

Infotainment control panel (736)

Principal use

The control module


1. is the control unit for the O-bus, which means that it controls all the unit on the O-bus. ICM is responsible for conveying information between the O-bus and the electric buses (P and I-bus).

2. is the control panel for audio, telephone and navigation. ICM shares some logic functions with the radio main unit but is the overall control unit for navigation and communication.

3. is the control unit for SID and SIDC (SID control panel).


The control module governs mainly the following functions:


1. Customer settings

2. Service intervals

3. Instrument lighting

4. Indicator sound

5. Trip computer functions

6. Warning and indicator messages, language and units.


Type

ICM is available in three levels:


1. Basic level (ICM 1) with only one keypad. The SETTINGS button activates the SID menu for displaying information associated with ICM functions.


2. Intermediate level (ICM 2). Includes a monochrome display and additional buttons for the telephone and MAIN/BACK for the ICM display menu. The SETTINGS button is replaced with the telephone button on ICM 2 and 3.


3. Top level (ICM 3) includes a 5.8" colour screen for navigation, etc.



The three control module variants (ICM 1-3) have a common circuit board (Vehicle Integrated Platform) and microprocessor with clock, RAM memory and programmable ROM.

The ICM variants have different control panels (keypads) with unique circuit board for the respective levels.

ICM 3 has a further circuit board/microprocessor containing ROM with its own software for the infotainment functions within ICM 3, e.g. colour screen and navigation. For detailed information on programming ICM 3, see Reprogramming ICM 2, ICM 3 and CU-GSM .

For a general description of the car's control modules, see Control Modules, general description .

Power supply, ground and bus communication


Pin no.
Signal type
Description
- O-bus (input) sleeve 1 is the optical signal input
- O-bus (output) sleeve 2 is the optical signal output
1 I-bus
2 I-bus
3 P-bus (-)
4 P-bus (+)
5 P-bus (-)
6 P-bus (+)
10 Ground Grounding point G43
20 +30 supply From instrument panel main fuse box (22) pin 14 via fuse 14.


Power supply and ground




The control module can be woken up by


Wake-up signal (12V) on I-bus

Button press on SID control panel

O-bus activated


The contacts are identical for all three control module variants. The fibre cable of the O-bus is connected to two plastic sockets, where socket 1 receives and socket 2 transmits. The control module is connected to the P and I-buses.

ICM communicates with SID through a 2-wire communication cable and a wake-up signal of 5V.

ICM communicates with SIDC with PWM signals. ICM powers SIDC with 5V and has a lead for the wake-up signal (5V) and a lead for system ground.