Interior lighting roof unit, front

/ 9-3 (9440) / 2003 / 3. Electrical System / Lighting and signalling systems / Interior lighting / Adjustment/replacement / Interior lighting roof unit, front

To remove

Important

Take care not to damage the roof unit.

1.	Remove the headlining.

2.	Remove the clips. Use nippers to cut the clips.

3.	Unplug the connectors from the roof unit.

4.	Undo the wiring harness, movement detector, temperature sensor and microphone from the roof unit holder.

5.	Lift out the roof unit.

To fit

1.	Position the roof unit in the headlining.

2.	Fit the wiring harness, movement detector, temperature sensor and microphone in the roof unit holder.

3.	Plug in the roof unit connectors.

4.	Fit the roof unit using new clips.

5.	Fit the headlining.

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.