Anti-theft alarm sensor (690), 4D

/ 9-3 (9440) / 2003 / 3. Electrical System / Theft protection / Adjustment/replacement / Anti-theft alarm sensor (690), 4D

To remove

1.	Remove the lens protector from the dome light.

2.	Remove the switch panel cover.

3.	Remove the theft alarm sensor by pressing a screwdriver against the clips.

4.	Unplug the connector.

To fit

1.	Plug in the connector.

2.	Fit the theft alarm sensor. A click should be heard.

3.	Fit the switch panel cover.

4.	Fit the lens protector.

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.