Washer nozzle, headlamp

/ 9-3 (9440) / 2003 / 3. Electrical System / Wash/wipe systems / Adjustment/replacement / Washer nozzle, headlamp

To remove

1.	Remove the Front bumper shell .

2.	Disconnect the washer hose.

3.	Remove the washer nozzle cover by turning it clockwise.

4.	Remove the screw from the washer nozzle.

5.	Remove the washer nozzle.

To fit

1.	Fit the washer nozzle into the bumper casing.

2.	Fit the screw.

3.	Pull out the washer nozzle and press home the cover bracket.

4.	Fit the cover.

5.	Fit the washer hose.

6.	Fit the Front bumper shell .

7.	Check that the headlamp washers work correctly.

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.