Slave cylinder
Slave cylinder |
To remove |
1. |
Remove the gearbox, see
Gearbox assembly man B207 or Gearbox assembly
FM68
|
2. |
Detach the delivery pipe.
|
3. |
Remove the three retaining bolts for the slave cylinder and pull it out.
|
To fit |
1. |
Apply
74 96 268 Thread locking adhesive
to the retaining bolts, see
List of lubricants and sealants
.
|
2. |
Bolt on the slave cylinder.
Tightening torque 10 Nm (7 lbf ft) |
3. |
Fit the delivery pipe to the slave cylinder.
Tightening torque 22 Nm (16 lbf ft) |
4. |
Bleed the slave cylinder before fitting the gearbox, see
Bleeding the slave cylinder
|
5. |
Fit the gearbox, see Gearbox assembly man B207 or
Gearbox assembly
.
|
6. |
Bleed the clutch. See
Bleeding the clutch hydraulic system in the car
.
|