Vacuum pump, 4-cyl diesel engine
|
Vacuum pump, 4-cyl diesel engine
|
1.
|
Remove the upper engine cover.
|
2.
|
Detach the vacuum hoses from the vacuum pump.
|
3.
|
Unplug the connector to the temperature/pressure sensor.
|
4.
|
Undo the cable rail and move to one side.
|
5.
|
Remove the four vacuum pump retaining bolts and carefully lift away the vacuum pump with adapter. Have a rag or similar ready to wipe up any spilled oil.
|
1.
|
Clean the sealing surfaces on the vacuum pump and the cylinder head.
|
2.
|
Apply new sealant to the vacuum pump and cylinder head, use
90 543 772 Silicone flange sealant
, and fit the vacuum pump with adapter.
Tightening torque 8 Nm (6 lbf ft)
|
3.
|
Fit the cable rail with screws
|
4.
|
Plug in the connector to the pressure/temperature sensor.
|
5.
|
Connect the vacuum hoses to the vacuum pump.
|
6.
|
Fit the upper engine cover.
|