Power steering return line, RHD
Power steering return line, RHD |
Important | ||
Scrupulous cleanliness must always be observed during all work with hydraulic components. |
||
To remove |
1. |
Diesel engine:
Raise the car.
|
2. |
Diesel engine:
Remove the lower engine cover.
|
3. |
Diesel engine:
Lower the car to the floor.
|
4. |
Diesel engine:
Remove the battery cover and the radiator pipe.
|
5. |
Place a suitable receptacle under the steering gear.
|
6. |
Remove the pipe from the bracket on top of the steering gear. Leave the screw and clamp in place.
Petrol engine: Remove the air filter cover with the hose and unplug the electrical connection. |
7. |
Disconnect the delivery line connection from the steering gear.
|
8. |
Disconnect the return line from the steering gear.
|
9. |
Diesel engine:
Open the cap of power steering fluid reservoir. Detach and lift up the reservoir with its bracket and let the fluid run out into the receptacle.
|
10. |
Remove the line from the reservoir.
|
11. |
Remove the line from the clasps.
|
12. |
Lift up the line.
|
To fit |
1. |
Fit the line in place.
Attach the return line to the steering gear. Make sure the O-ring is correctly seated.
Tightening torque 28 Nm (21 lbf ft) |
2. |
Attach the delivery line with a new O-ring to the steering gear.
Tightening torque 28 Nm (21 lbf ft) Petrol engine: Fit the air filter cover with the hose and plug in the connector. |
3. |
Fit the pipe to the bracket on top of the steering gear.
|
4. |
Fit the pipe and the hose clip to the power steering fluid reservoir.
|
5. |
Diesel engine:
Fit the reservoir with bracket to the battery tray.
|
6. |
Fit the hose into the clasps.
|
7. |
Fill with fluid and
bleed the power steering system
. Check for leaks.
|
8. |
Diesel engine:
Fit the radiator pipe and the battery cover.
|
9. |
Diesel engine:
Raise the car, wipe up any fluid spill and fit the lower engine cover.
|
10. |
Diesel engine:
Lower the car to the floor.
|