Pressure sensor, tyre pressure
| Pressure sensor, tyre pressure |
| To remove |
| 1. |
Remove the wheel.
|
|
| 2. |
Remove the
tyre
.
|
|
| 3. |
Remove the sensor
|
|
| To fit |
| 1. |
Fit the sensor and rubber seal in the hole in the wheel.
Hold the sensor when the nut is fitted. Tightening torque 10 Nm (7.5 lbf ft)
|
|
| 2. |
Fit the
tyre
.
|
|
| 3. |
Fit the
wheel
.
|
|
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
