SAAB WIS ONLINE

Brief description

Brief description

Overview



• ACM on the exhaust tunnel between the front seats (331)

• Side impact sensors, unique colour, light grey, dark grey, brown and yellow (328D, 328P, 328RD, 328RP)

• Front impact sensor on the bumper rail under the radiator fairing, blue (332FL/332FR)

• Seat position sensor in the seat rail (669D, 669P)

• Dual-stage driver airbag in the steering wheel (333D)

• Dual-stage passenger airbag in the dashboard (333P)

• Side airbag in the front seat (333Db, 333Pb)

• Belt tensioner (236D, 236P, 236RD, 236RP)

• Inflatable curtain, under the headlining, (732D, 732P)

• Steering wheel contact roller (336) (Column integration unit (703))

• Seat-belt buckle (70D, 70P)

• Battery disconnect switch (700)

• MIU (540)

• SID (541)

• ICM (736)

• BCM (707)


Description

The airbag system, together with the seat-belts, anti-submarining protection, steering column assembly and SAHR (Saab Active Head Restraint), is a complete system which minimises driver and passenger injury in the event of a collision.

The car is equipped with dual-stage driver and passenger airbags and side airbags in the front seats. There are also belt tensioners for the driver, passenger and outer rear seat positions as well as inflatable curtains on either side and a battery disconnect switch.

The airbag on the driver's side is placed in the steering wheel while the passenger airbag is located in the dashboard above the glove box. The side airbags are located inside the backrest trim on the outside of the front seats. The front seat belt tensioners are located in the sills by the B-pillars. The rear seat belt tensioners are located above the wheel housing in brackets under the parcel shelf for the outside rear seat places. The inflatable curtain is fitted from the A-pillar to the C-pillar under the headlining on the left and right hand sides. The battery disconnector switch is located on the battery's + pole.

The entire system is controlled by a control module located on the exhaust tunnel between the front seats. Using external sensors and integrated acceleration sensors, the control module senses when a collision occurs. The control module applies voltage to the electric detonators in those airbags and belt tensioners which can minimise driver and passenger injury. The electric detonators activate gas generators that inflate the airbags.

The seat belts for the driver's side, the passenger side and the outer rear seat positions are equipped with explosive seat belt tensioners which pull the seat belts taut in the event of a collision.

In order to prevent the driver from sliding under the dashboard during a collision, a knee shield is located under the dashboard on the driver's side.

The glove box acts as a knee shield for the front seat passenger.

If a side impact occurs, an inflatable curtain is deployed in order to protect the heads of the front and rear seat passengers. A side airbag is also activated for the driver or front seat passenger on the side of the impact.

The battery disconnect switch is activated by the ACM (Airbag Control Module) during a head-on collision. The battery disconnect switch cuts voltage to high-temperature and high-current areas.