Protective moulding, front door

/ 9-3 (9440) / 2003 / 8. Body / Body / Auxiliaries / Adjustment/replacement / Protective moulding, front door

To remove

1.	Use 82 93 474 Removal tool .

2.	Fit the tool in under the moulding. Begin from the rear and release the moulding clips from the door.

To fit

1.	Check that the plastic sleeves in the door are whole. Replace if necessary.

2.	Fit the moulding by guiding in the rear guide clips of the moulding. Press in so that the other clips fasten.

3.	Check the fit of the moulding.

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.