Protective moulding, rear door

/ 9-3 (9440) / 2003 / 8. Body / Body / Auxiliaries / Adjustment/replacement / Protective moulding, rear door

To remove

1.	Use 82 93 474 Removal tool .

2.	Fit the tool in under the moulding. Begin from the rear and release the moulding clips from the door. Free the hook.

To fit

1.	Check that the plastic sleeves in the door are whole. Replace if necessary.

2.	Guide the hook in the front hole of the rear door and guide the front guide clip in first. Press the other clips into place.

3.	Check the fit of the moulding.

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.