SAAB WIS ONLINE

Rear bumper member

Rear bumper member

To remove


1. Raise the car.

2. Remove the Rear bumper shell .

3. Remove the nuts securing the bumper member. If the car has been involved in a collision it may be necessary to cut away part of the member to gain access to the nuts.



To fit

Note

The rear frame member does not have any spacers on older cars. New spacers must therefore be fitted when changing the bumper member.



1. Position the bumper member. First, guide the member into the hole at the top left. Fit the nuts securing the bumper member.


2. Fit the Rear bumper shell .

3. Lower the car.