Rear door, adjustment
| Rear door, adjustment |
| Adjusting rear door, forwards - backwards, upwards - downwards |
| 1. |
Open the front door
|
|
| 2. |
Loosen the hinges' screws a little so that it the door hinges can just be moved.
|
|
| 3. |
Adjust the door.
|
|
| 4. |
Tighten the hinge brackets.
|
|
| 5. |
Touch up the paintwork if necessary.
|
|
| 6. |
Close the front door.
|
|
| Adjusting rear door, out-in |
| 1. |
Open the rear door.
|
|
| 2. |
Remove the relevant nut depending on the adjustment. Grind off the taper of the nut for better adjustment allowance.
|
|
| 3. |
Fit the ground nut. Undo all the other nuts slightly.
|
|
| 4. |
Adjust the door and tighten the nuts. Check the door alignment.
|
|
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
