Air vent, panel, passenger

/ 9-3 (9440) / 2003 / 8. Body / Interior equipment / Adjustment/replacement / Air vent, panel, passenger

To remove

1.	Remove the glove box. .

2.	Remove the panel air vent by releasing the locking tabs from inside the dashboard.

3.	Begin by freeing the inner locking tabs, then free the lower tabs and lastly the tabs on the domed side. At the same time pull out the vent.

To fit

1.	Position the panel vent. Ensure that the side defroster air channel is correctly located.

2.	Clip in the panel vent. Make sure that the locking tabs are properly engaged.

3.	Refit the glove box .

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.