(812-2532) Updating the software for sunroof pinch protection
|
MODIFICATION INSTRUCTION
|
|
Bulletin Nbr:
|
812-2532
|
|
Date:
...........
|
Februari 2005
|
|
Market:
|
Enligt sep. lista
|
|
|
Updating the software for sunroof pinch protection
|
|
Customer Satisfaction Programme 154 39
|
Cars in stock must be rectified before delivery.
A personal communication must be sent to the owners of cars already delivered requesting them to get in touch with the nearest Saab garage as soon as possible to have the fault rectified.
Saab 9-3 (9440) M03-M05, with sunroof Anti-Pinch, within Vehicle Identification Number range 31000001 - 51008572
The setting in the software for sunroof module pinch protection is too narrow, and this can result in the pinch protection deploying unnecessarily.
For fitting the modification identity plate (not US/CA):
12 785 148 Modification identity plate
93 160 907 Cleaning agent Motip Dupli, aerosol 400 ml, (sufficient for 50-100 cars.)
Not US/CA:
Before proceeding, check box B4 of the modification identity plate. From and including M04, the table "Table of Modifications" can be found in the car's Warranty and Service Book. A modification identity plate must be fitted in accordance with the section "Fitting the modification identity plate" where local directives require the marking of the car. If the box is not marked, continue as follows.
|
•
|
Update the SRM (sunroof module) with the latest software. Use TIS 2004-6 or later.
|
|
Marking the modification identity plate (not US/CA)
|
After carrying out the procedure, box B4 on the modification identity plate must be marked. From and including M04, the table "Table of Modifications" can be found in the car's Warranty and Service Book. Mark the box with the number "7" if the procedure was carried out by the importer or with the number "8" if carried out by the dealer.
|
Fitting the modification identity plate (not US/CA)
|
|
Note
|
|
A modification identity plate must only be fitted where local directives require the marking of the car.
|
|
•
|
Fit the modification identity plate in accordance with WIS - 9-3 (9440) M04 - General - General - Technical data - Plates and labels.
|
|
Warranty/Time Information
|
See separate information.
