ACM / B0096 06
Read the instructions below then
start the fault diagnostic procedure.
Symptom: Airbag warning lamp is lit
Passenger Seat Belt Sensor Circuit, Open/Short to Ground
Fault symptom
Airbag warning lamp is lit
On-board diagnosis
Type of diagnosis:
Enable criteria:
Fault criteria:
Current in the sensor circuit is below 4 mA for approximately 0.5 s. |
System reaction to a fault:
• | Control module uses the threshold value during the event of a collision. |
Checking the wiring harness
Move the wiring harness at several spots and in several directions to reveal intermittent breaks and short-circuits. Check switches, connectors and crimp connections for oxidation, retracted pins and pin clamping force.
Diagnostic help
IMPORTANT
• | Read "Before starting fault diagnosis" under Fault diagnosis, general before beginning fault diagnosis. |
Diagnostic help
Diagnosis regards: