ACM / B1001 41
Read the instructions below then
start the fault diagnostic procedure.
Symptom: Airbag warning lamp is lit
Control Module not Added
Fault symptom
Airbag warning lamp is lit
On-board diagnosis
Type of diagnosis:
| Diagnostics is carried out once each time the ignition is switched on. |
Enable criteria:
Fault criteria:
| The control module has not been configured during installation |
System reaction to a fault:
| Airbag warning lamp is lit |
Checking the wiring harness
Move the wiring harness at several spots and in several directions to reveal intermittent breaks and short-circuits. Check switches, connectors and crimp connections for oxidation, retracted pins and pin clamping force.
Diagnostic help
Control module was not added.
See "Procedure after fitting the control module"
