ICM1 / B1001 41
Read the instructions below then
start the fault diagnostic procedure.
Symptom: Message appears in display.
Control Module not Added
Fault symptom
Message appears in display.
On-board diagnosis
Type of diagnosis:
| Diagnostics runs each time the control module is active and when programming has been carried out. |
Enable criteria:
Fault criteria:
| Control module was not added. |
System reaction to a fault:
| The control module uses preprogrammed values. |
Diagnostic help
Control module was not added.
See "Procedure after fitting the control module"
Diagnostic help
Functions in the diagnostic tool related to the fault:
| See menu "All - Add/Remove" |
