ICM3 / B1016 00
Read the instructions below then start the fault diagnostic procedure.
| B1016 00 |
Control Module not Added
On-board diagnosis
Type of diagnosis:
| Diagnostics runs each time the control module becomes active and when chassis programming has been carried out. |
Enable criteria:
| Ignition ON. |
Fault criteria:
| VIN not programmed. |
Diagnostic help
Control module was not added.See "Procedure after fitting the control module"
Diagnostic help
Functions in the diagnostic tool related to the fault:
| See menu "All - Add/Remove" |
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
