SAAB WIS ONLINE

ICM3 / B1023 08

Read the instructions below then start the fault diagnostic procedure.

  B1023 08


SIDC Knob Circuit, Invalid Signal



On-board diagnosis

Type of diagnosis:

Continuous

Enable criteria:

Ignition ON.

Fault criteria:

The control module receives a faulty signal.

Checking the wiring harness

Move the wiring harness at several spots and in several directions to reveal intermittent breaks and short-circuits. Check switches, connectors and crimp connections for oxidation, retracted pins and pin clamping force.

Diagnostic help

Diagnosis regards:

Electrical fault in connecting leads or component.