MIU / B3902 70
Read the instructions below then
start the fault diagnostic procedure.
Symptom: Car does not start.
MIU or CIM not Added
Fault symptom
Car does not start.
On-board diagnosis
Type of diagnosis:
| Diagnostics is carried out once each time the ignition is switched on. |
Enable criteria:
Fault criteria:
| Control module not programmed. |
Diagnostic help
Control module was not added.
See "Procedure after fitting the control module"
Diagnostic help
Functions in the diagnostic tool related to the fault:
| See menu "All - Add/Remove" |
