PSG16 / P0118 01
Read the instructions below then
start the fault diagnostic procedure.
Symptom: Fault indicator lamp (for further information see WIS Fault diagnosis, general)
Radiator fan runs continuously when the engine is running.
Extended glow duration.
Engine Coolant Temperature Sensor Circuit. Short to B+ / Open circuit.
Fault symptom
Fault indicator lamp (for further information see WIS Fault diagnosis, general)
Radiator fan runs continuously when the engine is running.
Extended glow duration.
On-board diagnosis
Type of diagnosis:
Enable criteria:
The following diagnostic trouble codes may not be generated: |
Fault criteria:
When input voltage is higher than 4.9 V for more than 0.6 seconds. |
Dependent:
System reaction to a fault:
The control module uses 0°C as a substitute value. |
OK report:
Input conditions fulfilled without a fault reported. |
Checking the wiring harness
• | Faults in the control module female connector can be the cause of the DTC. Check the connector with respect to oxidation, depressed pins and pin clamping force. |
• | Move the wiring harness at several spots and in several directions to reveal intermittent breaks and short-circuits. Check switches, connectors and crimp connections for oxidation, retracted pins and pin clamping force. |
Diagnostic help
Diagnosis regards:
Functions in the diagnostic tool related to the fault:
Engine Coolant Temperature |
Coolant Temperature Sensor |
(See also description of readings/activations in diagnostic tool) |