PSG16 / P0314 66
Read the instructions below then
start the fault diagnostic procedure.
Symptom: Fault indicator lamp (for further information see WIS Fault diagnosis, general)
Performance loss.
A/C not working, no cooling.
Misfire at Medium RPM
Fault symptom
Fault indicator lamp (for further information see WIS Fault diagnosis, general)
Performance loss.
A/C not working, no cooling.
On-board diagnosis
Enable criteria:
Engine speed between 1100 and 2300 rpm. |
More than 8 mg fuel/combustion. |
NONE of the following DTCs must be detected: |
Fault criteria:
Sufficient number of misfires detected. |
System reaction to a fault:
Limp Home, fuel limitation. |
Output to the A/C relay is switched off. |
Fault handling:
Take note of how important it is with cleanliness when working on the fuel system. |
Diagnostic help
All causes for misfiring can cause DTC generation, e.g. combustion deviation in one of the cylinders.
This may be due to:
• | Leaking high-pressure lines. |
• | Damaged piston, cylinder or valve. |
• | Mechanical fault in the engine. |
• | Blocked or leaking fuel bridges. |
• | Damaged sealing washers to injectors. |
Diagnostic help
Diagnosis regards:
Functions in the diagnostic tool related to the fault:
(See also description of readings/activations in diagnostic tool) |