PSG16 / P0650 F6

Read the instructions below then start the fault diagnostic procedure.

Symptom: Check Engine lamp, faulty function with ignition ON.

P0650 F6

Fault symptom

Check Engine lamp, faulty function with ignition ON.

On-board diagnosis

Type of diagnosis:

Continuous

Enable criteria:

Ignition ON.

Output activated.

Fault criteria:

Output short circuit to B+ for more than 0.6 s.

System reaction to a fault:

None

OK report:

Fault criteria NOT fulfilled for 0.6 s.

Checking the wiring harness

•	Faults in the control module female connector can be the cause of the DTC. Check the connector with respect to oxidation, depressed pins and pin clamping force.

•	Move the wiring harness at several spots and in several directions to reveal intermittent breaks and short-circuits. Check switches, connectors and crimp connections for oxidation, retracted pins and pin clamping force.

Diagnostic help

Diagnosis regards:

•

IMPORTANT

Functions in the diagnostic tool related to the fault:

Test value:

Fault indicator lamp (for further information see WIS Fault diagnosis, general)

Activation:

Fault indicator lamp (for further information see WIS Fault diagnosis, general)

(See also description of readings/activations in diagnostic tool)