Simtec radiator fan relay unit, change
|
|
Simtec radiator fan relay unit, change
|
|
2.
|
Disconnect the battery.
Remove the ground cable.
|
|
3.
|
Pull off the cable set connector to the relay unit (1)
Remove the cable set
|
|
4.
|
Remove the relay unit (1)
Pull off the fan motor cable set connector (2)
Undo the bolt (arrow)
|
|
5.
|
Fit the relay unit
Tighten the bolt - Tightening torque 2 Nm
Fasten the fan motor cable set connector
|
|
6.
|
Connect the cable set connector for the relay unit
Fit the cable set
|
|
7.
|
Connect the battery.
Fit the ground cable.
|
|
8.
|
Program erased memories
|
