SAAB WIS ONLINE

Pressure release valve

Pressure release valve

To remove



1. Raise the car and remove the right-hand front wheel.

2. Remove the plug from the timing cover.

3. Remove the seal, spring and valve.


To fit



1. Clean all the parts. Replace with new parts if necessary.

2. Fit the valve, spring and a new seal.

3. Tighten the plug.

Tightening torque 45 Nm (33 lbf ft)

4. Fit the wheel. Refer to Wheels

Tightening torque 110 Nm (81 lbf ft)

5. Lower the car. Check the oil level. Top up if necessary.