Bypass valve diaphragm, B207E/L
Bypass valve diaphragm, B207E/L |
Important | ||
Always use wing covers when working in the engine bay. |
||
To remove |
1. |
Remove the mass air flow sensor connector and the hoses.
|
2. |
Remove the air cleaner casing cover and the intake hose to the turbo.
|
3. |
Remove the hose from the turbo bypass valve.
|
4. |
Unscrew the valve's cover, holding the cover firmly when the bolts are removed.
|
5. |
Lift the cover away and replace the parts.
|
To fit |
1. |
Clean the cover and the turbo from gasket residue.
|
2. |
Fit the diaphragm kit as illustrated.
|
3. |
Fit the cover to the turbo. Use the new bolts and the new gasket. Apply a thin layer of non-acidic Vaseline to the cover to retain the gasket.
Tightening torque 8 Nm (6 lbf ft). |
4. |
Fit the hose to the turbo's bypass valve.
|
5. |
Fit the air cleaner casing cover and the intake hose to the turbo.
|
6. |
Fit the mass air flow sensor connector and the hoses.
|
7. |
Check the bypass valve.
|
8. |
Remove the wing cover.
|