Main instrument unit (540)
Main instrument unit (540) |
To remove |
Carry out procedure before control module removal .
1. |
Remove the
Air vent, panel, driver
and
Centre air vent, panel
.
|
2. |
Remove the infotainment control panel (ICM).
|
3. |
Remove the SID unit control panel (SIDC) by pressing together the two tabs on the back and then pressing out the control panel from behind, starting at the top.
|
4. |
Remove the instrument plate.
|
5. |
Remove the main instrument unit and remove the connectors for the main instrument unit.
|
To fit |
Important | ||
Take care when plugging in the connector so as not to damage or press out the pins/sleeves in the connector. For further information regarding connectors, refer to Connectors, handling and inspection . |
||
1. |
Connect and fit the main instrument unit.
|
2. |
Fit the instrument plate.
|
3. |
Connect SIDC and fit it by positioning the hook in the bottom and then pressing in the top.
|
4. |
Fit the ICM unit.
|
5. |
Align and fit
Centre air vent, panel
and
Air vent, panel, driver.
|
Carry out Procedure after control module replacement .