Service indicator, reset

/ 9-3 (9440) / 2004 / 3. Electrical System / Driver information, main instrument unit and SID / Adjustment/replacement / Service indicator, reset

1.	Set the ignition lock to ON position.

2.	Press the CUSTOMIZE button on the SIDC (SID control panel).

3.	Select “System settings” from the menu, followed by “Service Info”.

4.	Select “Reset Service Ind”.

5.	Select "YES" then press the INFO knob (SET) to reset the message.

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.