Fitting kit, anti-theft alarm, CV
Fitting kit, anti-theft alarm, CV |
1. |
Siren
|
2. |
Siren console
|
3. |
Bonnet switch
|
4. |
Anti-theft alarm sensor
|
5. |
Labels
|
Siren |
1. |
Open the luggage compartment.
|
2. |
Remove the
luggage compartment side trim, CV
on the left-hand side.
|
3. |
Remove the tape holding the cables.
|
4. |
Fit the siren bracket.
Tightening torque 8 Nm (6 lbf ft) |
5. |
Refit the siren. There should be an audible click.
|
6. |
Plug in the connector to the siren.
|
7. |
Fit the
luggage compartment side trim, CV
|
8. |
Close the luggage compartment.
|
Bonnet switch |
1. |
Open the bonnet.
|
2. |
Remove the clip holding the cables.
|
3. |
Plug in the connector to the bonnet switch.
|
4. |
Fit the bonnet switch.
|
5. |
Close the bonnet.
|
Anti-theft alarm sensor |
1. |
Remove the roof lamp from the window frame trim.
|
2. |
Remove the two protective cases from inside the switch panel.
|
3. |
Fit the anti-theft alarm sensor. A click should be heard.
|
4. |
Open the hatch of the connector holder.
|
5. |
Plug in the connector of the anti-theft alarm sensor (blue connector).
|
6. |
Close the hatch of the connector holder.
|
7. |
Refit the roof lamp.
|
8. |
Select
Add / Remove- Accessories -
Theft Alarm and then follow the on-screen instructions.
|
Anti-theft alarm labels |
Affix the anti-theft alarm labels, see Affixing anti-theft alarm labels .