Gear selector control module (726)
Gear selector control module (726) |
To remove |
Before removal, see Before changing a control module .
1. |
Remove the right side cover on the centre console (1 screw).
|
2. |
Remove the front stay.
|
3. |
Remove the front part of the air duct.
|
4. |
Unplug the control module connector and the upper ribbon cable and disconnect the solenoid cable.
|
5. |
Release the catch with a screwdriver and remove the control module by pulling it forward.
|
To fit |
1. |
Fit the control module.
|
2. |
Plug in the control module connector, making sure the gear segment on the side of the connector is engaged. Connect the solenoid cable and the ribbon cable.
|
3. |
Check the operation.
|
4. |
Fit the front part of the air duct.
|
5. |
Fit the front stay.
|
6. |
Fit the right side cover on the centre console.
|
Perform After changing a control module .