Trionic T8 control module (589)
Trionic T8 control module (589) |
To remove |
Carry out actions before removing control module .
1. |
Ignition key in LOCK position.
|
2. |
Remove the upper engine cover.
|
3. |
Carefully press down the catches and carefully unplug the connectors from the control module one at a time so that the connection pins, etc. are not damaged.
|
4. |
Remove the control module.
|
To fit |
1. |
Fit the control module. Do not forget the ground cable.
Tightening torque 10 Nm (7 lbf ft)
|
2. |
Plug in the connectors and check that they are locked.
|
3. |
Fit the upper engine cover.
|
Carry out actions after replacement of control module .