Tyre Pressure Monitoring Module (753)
Tyre Pressure Monitoring Module (753) |
To remove |
1. |
If a new control module is to be fitted:
Carry out procedures before fitting a control module
.
|
2. |
Remove the LH cover from the centre console.
|
3. |
Remove the holder with the receiver.
|
4. |
Remove the connector.
|
5. |
Remove the receiver from the holder.
|
To fit |
1. |
Fit the receiver to the holder.
|
2. |
Fit the holder with receiver.
|
3. |
Plug in the connector.
|
4. |
Fit the cover to the centre console.
|
5. |
When fitting a new control module:
Carry out procedures after fitting a control module
.
|