Torque converter seal

/ 9-3 (9440) / 2004 / 4. Transmission / Automatic Transmission / Adjustment/replacement / Torque converter seal

To remove

1.	Remove the Torque converter.

2.	Thread in 87 92 384 Puller, torque converter seal inside the seal and use 83 90 270 Sliding hammer to detach the seal.

To fit

1.	Fit the new seal using 5-speed: 87 91 311 Socket, bearing driver shaft . (A)

2.	Fit the Torque converter .

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.