Drive shaft seal, right-hand

/ 9-3 (9440) / 2004 / 4. Transmission / Drive shafts / Adjustment/replacement / Drive shaft seal, right-hand

Changing in car

To remove

1.	Remove the intermediate shaft. See Intermediate shaft .

2.	Remove the seal using a large screwdriver. Note Take care not to scratch the hole in the gearbox for the drive shaft seal.

To fit

1.	Tap on the new seal with 87 92 657 Fitting drift, drive shaft seals .

2.	Fit the intermediate shaft as described in Intermediate shaft .

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.