SAAB WIS ONLINE

Anti-roll bar, To remove and To fit, Z18XE

Anti-roll bar, To remove and To fit, Z18XE

To remove


1. Remove the subframe. Subframe, To remove and To fit, Z18XE


2. Remove the anti-roll bar (2) from the front axle beam

2 x Unscrew bolt for mounting bracket (3) on both sides

Instructions: Mark fitting position.

3. Remove the anti-roll bar damping rubber.

To fit

4. Fit the anti-roll bar (2) on the front axle beam

Attach the damping rubber on the anti-roll bar and adjust

Instructions: Note fitting position and marking.

2 x Screw in bolt for mounting bracket (3) on both sides 20 Nm


5. Fit the subframe. Subframe, To remove and To fit, Z18XE .