Bootlid lock, CV
Bootlid lock, CV |
To remove |
1. |
Open the bootlid and remove the trim.
|
2. |
Remove the lock cover by inserting a screwdriver and undoing the catches.
|
3. |
Remove the lock's screws
|
4. |
Cars with guard
: Lift out the guard, which is secured with the lower screw.
|
5. |
Remove the lock cylinder nuts. Remove the cylinder cover. Unhook the cable.
|
6. |
Lift out the lock.
|
7. |
Unplug the connector.
|
8. |
US/CA
: Remove the cable for the emergency opening handle from the bracket.
|
To fit |
1. |
US/CA
: Fit the cable for the emergency opening handle in the bracket.
|
2. |
Plug in the connector.
|
3. |
Put the lock in place.
|
4. |
Hook on the lock cylinder cable. Fit the lock cylinder cover. Fit the nuts.
|
5. |
Cars with guard
: Fit the guard.
|
6. |
Fit the lock's screws.
|
7. |
Fit the lock cover. Make sure the clips engage properly.
|
8. |
Fit the boot lid trim.
|