SAAB WIS ONLINE

PSG16 / P0197 02

Read the instructions below then start the fault diagnostic procedure.

Symptom: Fault indicator lamp (for further information see WIS Fault diagnosis, general)

  P0197 02


Oil Temperature Sensor Circuit. Short to Ground.

Fault symptom

Fault indicator lamp (for further information see WIS Fault diagnosis, general)

On-board diagnosis

Type of diagnosis:

Continuous

Enable criteria:

Ignition ON.
Engine running longer than 60 s.
NONE of the following DTCs must be detected:
P0116, P0117, P0118

Fault criteria:

Voltage is lower than 0.49V for more than 0.6 s.

System reaction to a fault:

The control module uses 100°C as a substitute value.

OK report:

Input conditions fulfilled without a fault reported.

Checking the wiring harness

Faults in the control module female connector can be the cause of the DTC. Check the connector with respect to oxidation, depressed pins and pin clamping force.
Move the wiring harness at several spots and in several directions to reveal intermittent breaks and short-circuits. Check switches, connectors and crimp connections for oxidation, retracted pins and pin clamping force.

Diagnostic help

Diagnosis regards:


Functions in the diagnostic tool related to the fault:

Oil Temperature Sensor
(See also description of readings/activations in diagnostic tool)