PSG16 / P0341 2C
Read the instructions below then
start the fault diagnostic procedure.
Symptom: Fault indicator lamp (for further information see WIS Fault diagnosis, general)
Performance loss.
A/C not working, no cooling.
Pump Camshaft Mechanical Fault.
Fault symptom
Fault indicator lamp (for further information see WIS Fault diagnosis, general)
Performance loss.
A/C not working, no cooling.
On-board diagnosis
Type of diagnosis:
Enable criteria:
Fault criteria:
Control module has detected that the signal from the crankshaft position sensor has arrived earlier or later than the signal from the camshaft sensor. |
System reaction to a fault:
Limp Home, engine shut-off. |
Diagnostic help
If another DTC is present in PSG16, start fault diagnosis with that DTC.
The camshaft can be set incorrectly, see document "Setting valve timing".
Diagnostic help
Diagnosis regards:
Internal diesel pump fault. |
Functions in the diagnostic tool related to the fault:
(See also description of readings/activations in diagnostic tool) |