PSG16 / P0343 07
Read the instructions below then
start the fault diagnostic procedure.
Symptom: Fault indicator lamp (for further information see WIS Fault diagnosis, general)
Engine stops.
Pump Camshaft speed has been too high.
Fault symptom
Fault indicator lamp (for further information see WIS Fault diagnosis, general)
Engine stops.
On-board diagnosis
Type of diagnosis:
Enable criteria:
Fault criteria:
| Camshaft speed has been higher than 3100 rpm for 65 seconds. |
System reaction to a fault:
| Limp Home, fuel limitation. |
Diagnostic help
Fuel shut-off takes place at 5000 rpm.
The engine has been forced to over-rev. This may have occurred during wide open throttle acceleration 1-2-3-2 or shifting 4-1.
Diagnostic help
Functions in the diagnostic tool related to the fault:
| (See also description of readings/activations in diagnostic tool) |
