SAAB WIS ONLINE

PSG16 / P2228 03

Read the instructions below then start the fault diagnostic procedure.

Symptom: Fault indicator lamp (for further information see WIS Fault diagnosis, general)

  P2228 03


Atmosphere Pressure Sensor Circuit, Open/Short to Ground

Fault symptom

Fault indicator lamp (for further information see WIS Fault diagnosis, general)

On-board diagnosis

Type of diagnosis:

Continuous

Enable criteria:

Ignition ON.
NONE of the following DTCs must be detected:
P0106, P0107, P0108

Fault criteria:

Voltage is lower than 0,2 V for more than 0,6 s.

System reaction to a fault:

The control module uses a substitute value of 70 kPa.

OK report:

Fault criteria NOT fulfilled.

Checking the wiring harness

Faults in the control module female connector can be the cause of the DTC. Check the connector with respect to oxidation, depressed pins and pin clamping force.
Move the wiring harness at several spots and in several directions to reveal intermittent breaks and short-circuits. Check switches, connectors and crimp connections for oxidation, retracted pins and pin clamping force.

Diagnostic help

Diagnosis regards:


Functions in the diagnostic tool related to the fault:

Test value:
Atmosphere Pressure Sensor
Atmospheric Pressure
(See also description of readings/activations in diagnostic tool)